The Method 2 Deck is part of Tilt’s Stage III collection and is the next natural development for convex decks.
The Method 2 features Tilt’s tangential convex that is flush with dropouts. In simpler terms, this deck has a flat center and smooth, convex curves on the sides that flow seamlessly from the middle section, mimicking a well-worn deck. A new, revolutionary, 3D machined blunt plate from Tilt provides a flat front for locking in blunts and overcrooks. A thinner, more flexible deck extrusion is used to retain the playful spirit of the original Method. Not good for huge drops but great for a laid back aesthetic sliding over any obstacle in its path, the Method 2 Deck will inspire you to charge into the crustiest ledges and rails.
Specs
Length: 572mm – 22.5″
Width: 165mm – 6.5″
Weight: 2.06 kg – 4.54 lbs
Headtube / neck: 3D machined
HT Angle: 84°
Concave: Yes
End of deck type: Boxed with refined welded pegs
Material: Anodize 6061 T6 aluminium
Brake: Steel flex fender
Other: Welded blunt plate. Crook groove. Bottom of the deck is convex.
Compatibility
WHEEL DIAMETER
100mm: Yes
110mm: Yes
120mm: Yes
125mm: No
WHEEL WIDTH
24mm: Yes.
28mm: No
30mm: Yes. Spacers included
12STD: No
