EBMX X-9000 V3 Controller Kit – 50kW FOC E-Moto Performance Controller
The EBMX X-9000 V3 is the most advanced electric motorcycle controller on the market — purpose-built for serious riders and racers. Re-engineered from the ground up with a new power stage, next-gen logic system, and redesigned rider interface, the V3 delivers 50kW continuous output, 1600A burst current, and a complete plug-and-play kit with everything needed for installation. No additional purchases required.
Note: All X-9000 units shipped from July 2025 onward are Version 3. V2 wiring harnesses are NOT compatible with V3. Colored V2 heatsinks are compatible.
Power Stage
- 50kW Continuous Output | 1000A Phase Current | 1600A Burst
- 30 x 120V Infineon MOSFETs for extreme reliability under load
- Redesigned multilayer PCB & CNC copper busbars for superior thermal management
- Water-cooling option available for race-level endurance
- IP67 rated CNC alloy case — built for punishment
Next-Gen Logic
- 68 IO support — runs anything from race builds to full-featured street setups
- Custom EBMX VESC firmware with Field-Oriented Control (FOC) for smooth throttle and maximum efficiency
- Integrated IMU for wheel lift assist — programmable for launch control, anti-loop, or stunt mode
- Dual Hall throttle ready with two ADC inputs for increased safety and reliability
Race-Ready Tuning
- 6 fully customizable power levels (Race + Street modes)
- Graphical UI for throttle tuning, regen braking & EBMX E-Clutch
- 15+ plug-and-play battery profiles (Load & Go)
- 30+ preloaded motor tunes supported out of the box
- One-touch OTA firmware updates
Kit Contents
- X-9000 V3 Controller
- Plug-and-Play Harness & Mount Kit
- Air-Cooled Heatsink (Black)
- SW102T Color Display
- Thumb Throttle
- Bluetooth Module
- 1-2 Harness
Bike Compatibility
- SurRon Light Bee X
- SurRon Ultra Bee
- Talaria MX3 / MX4 / MX5
- Talaria XXX / XXX PRO
- E-Ride Pro SS 2.0 (V3 Plug, with or without Breaker)
- E-Ride Pro SS 3.0 (with Breaker)
- E-Ride Pro SS 3.1 (without Breaker)
- E-Ride Pro SR
- ReRode R1
- QS138 Motors (90H, 70H)
Motor Compatibility
- OEM SurRon Light Bee, Ultra Bee
- OEM Talaria Sting MX3, MX4 (R), MX5
- EBMX XLB-60, XTA-60, XUB-80
- KO RS SurRon, KO F Spec SurRon & Talaria
- QS138 – 90H & 70H
- OEM E-Ride Pro SS 2.0, SS 3.0, SR
Specifications
| Rated Power | 50kW (Continuous) |
| Voltage | 120V |
| Working Voltage Range | 48V – 93V (22S) |
| Phase Current | 1000A continuous / 1600A burst |
| MOSFETs | 30 x Infineon 120V |
| Control Protocol | FOC (VESC-based, EBMX modified) |
| Waterproofing | IP67 |
| Operating Temp | -25°C to 80°C |
| Heatsink Colors | Black / Red / White / Blue (colored sold separately) |
| Warranty | 2 Years |
| Weight | 9.0 lbs |
